|
Lever Types and Ordering Information
PLEASE READ THESE INSTRUCTIONS THOROUGHLY!
I Can Not Make Your Items without
Proper Measurements!
This is what Broken Arrow Leather
Will Need to Know to Complete Your Order.
1. Year, Make, Model and Engine Displacement of your bike.
2. Does your bike have TAPERED or NON-Tapered Levers.
3. Measurements of Levers. (Click Send Your Specs Below to send)
The Two Examples pictured below are TAPERED Notice How they are wider toward the pivot end than at the ball end.
 
The next two examples are NON-TAPERED. Notice how they are pretty much the same width through the length of the lever.
 
How to Measure Your Levers
1. Measure the circumference, the distance around the lever at the ball end. Measure the lever itself, not the ball.
2. Measure the circumference of the lever at 4 inches up from the ball end. Measure from where the ball meets the lever, not from the end of the ball.
3. The CIRCUMFERENCE is the measurement AROUND your lever, don't measure the width. To do this wrap a tape measure around the lever to get a total distance around it. If you don't have a flexible tape you can use a piece of paper by wrapping it around, marking it and then laying it flat and using a ruler to measure the distance.
4. Let Broken Arrow Leather Know What You Need. When paying with PayPal, in the note field type in, for example:
I have a 1986 Harley-Davidson Electra Glide Classic 1340cc, with Tapered Levers. Measurement at the Ball End is 1 1/2 Inches and at 4 inches up the measurement is 2 5/8"
If you have already ordered click
| 
